VICTOR GROUP
Rack and Pinion Drive SystemCatalog ATLANTA

Rack and Pinion Drive SystemCatalog ATLANTA

Send Inquiry

Rack and Pinion Drive SystemCatalog ATLANTA

Atlanta rack and pinion drive systems

Atlanta are the world's largest supplier of precision rack and pinion, with the largest range of high quality racks available. This is complemented by their servo gearboxes which are designed to support the resultant radial and axial forces. Atlanta racks are available in a range of materials such as; steel, stainless steel and plastic. All steel racks are available as straight tooth or helical tooth. Helical toothed rack and pinion drives have the advantage of lower noise and offer higher load capability than straight tooth. Straight toothed gears and rack have the advantage of zero axial force on the pinion.
Steel racks are classified by their Quality rating from quality 10 down to quality 4. The lower the quality number the tighter the tolerance of the the tooth thickness and the pitch of the teeth. Also in general the lower the quality number the greater the load capability for a given size of rack. The tighter tolerance or greater precision is achieved by the way in which the teeth are treated. The teeth can be induction hardened, quenched and tempered, case hardened or untreated which is classified as "soft". Following the heat treatment the greater precision is achieved by grinding to the required tolerance. Atlanta racks are classified as:

  • Basic rack (BR)
    • Induction hardened - quality 10 - low accuracy, medium load capability
    • Soft - quality 9 - medium accuracy, low load capability
  • Precision rack (PR)
    • Quenched and tempered - quality 8 - medium accuracy, low to medium load
    • Induction hardened and ground - quality 8 - medium accuracy, medium load
  • High Precision rack (HPR)
    • Induction hardened or carburized hardened and ground - quality 6 and quality 7 - high accuracy, high load
  • Ultra High Precision rack (UHPR)
    • Induction hardened or carburized hardened and ground - quality 5 and quality 4 - ultra high accuracy, high load
  • Atlanta helical rack and pinion can be supplied in modules 1.5 to 12. This allows a maximum transmittable force of up to 409kN for continous B10 lifetime.

    The helical style provides several key benefits over the straight style, including:

    • Helical rack & pinion runs quieter than the straight, especially at high speeds
    • Helical rack & pinion has a higher contact ratio (the number of effective teeth engaged) than straight, which increases the load carrying capacity
    • Helical rack lengths are nice round numbers, e.g. 500.0 mm and 1,000.0 mm, for easy integration with machine bed lengths
    • In most cases, helical rack & pinion cost the same as the straight rack & pinions!
    • Atlanta straight rack and pinion can be supplied in modules 1 to 12. 

      Straight rack lengths are always a multiple of pi., e.g. 502.65 mm and 1005.31 mm up to 30015.93 in one length

      This allows a maximum transmittable force of up to 333kN for continous B10 lifetime.

      Mounting holes can be specified for continous linking.

      See the videos tab for instructions on how to mount the rack and pinion correctly.

      ATLANTA stainless driving elements allows to solve any application requirements in case of special environmental conditions